This guide describes how to obtain and install binary packages for the Voci Speech Recognition (SR) plugin to the UniMRCP server on Red Hat-based Linux distributions. The document is intended for system administrators and developers.
Instructions provided in this guide are applicable to the following versions.
UniMRCP 1.7.0 and above
UniMRCP Voci SR Plugin 1.0.0 and above
UniMRCP RPMs are currently available for x86_64 (64-bit) architecture only.
|Operating System||Released||End of Support|
|Red Hat / Cent OS 7||November 2021||TBA|
|Red Hat / Cent OS 8||November 2021||TBA|
Packages for other distributions can be made available upon request.
UniMRCP binary packages are available to authenticated users only. In order to register a free account, please visit the following page.
A newly registered account needs to be verified by the user and then activated by the administrator prior further proceeding.
Account verification and activation.
The account credentials can be used to log in to the following websites.
Using the Yellowdog Updater, Modifier (yum), a command-line package management utility for Red Hat-based distributions, is recommended for installation of UniMRCP binary packages.
The content of a typical yum configuration file, to be placed in /etc/yum.repos.d/unimrcp.repo, is provided below.
[unimrcp] name=UniMRCP Packages for Red Hat / Cent OS-$releasever $basearch baseurl=https://username:email@example.com/repo/yum/main/rhel$releasever/$basearch/ enabled=1 sslverify=1 gpgcheck=1 gpgkey=https://unimrcp.org/keys/unimrcp-gpg-key.public [unimrcp-noarch] name=UniMRCP Packages for Red Hat / Cent OS-$releasever noarch baseurl=https://username:firstname.lastname@example.org/repo/yum/main/rhel$releasever/noarch/ enabled=1 sslverify=1 gpgcheck=1 gpgkey=https://unimrcp.org/keys/unimrcp-gpg-key.public
The username and password fields included in the HTTPS URI must be replaced with the corresponding account credentials.
In order to verify that yum can properly connect and access the UniMRCP repository, the following command can be used.
yum repolist unimrcp yum repolist unimrcp-noarch
where unimrcp and unimrcp-noarch are names of the sections set in the yum configuration file above.
In order to retrieve a list of packages the UniMRCP repository provides, the following command can be used.
yum --disablerepo="*" --enablerepo="unimrcp" list available yum --disablerepo="*" --enablerepo="unimrcp-noarch" list available
In order to install the Voci SR plugin, including all the dependencies, use the following command.
yum install unimrcp-voci-sr
In order to install the additional data files for the sample client application umc, the following command can be used.
yum install umc-addons
This package is optional and provides additional data which can be used for validation of basic setup.
UniMRCP RPM packages can be installed manually using the rpm utility. Note, however, that the system administrator should take care of package dependencies and install all the packages in appropriate order.
The RPM packages have the following naming convention:
packagename is the name of a package
universion is the UniMRCP version
packageversion is the RPM release version
rhelversion is the Red Hat version
arch is the architecture (x86_64, i686, …)
The following is a list of UniMRCP RPM packages required for the installation of the Voci SR plugin.
|unimrcp-voci-sr||Voci SR plugin to the server.|
|unilibevent||UniMRCP edition of the libevent library.|
|umc-addons||Sample en-US data files used with umc. [Optional]|
|unilicnodegen||Node information retrieval tool, required for license deployment.|
|unimrcp-server||Shared library and application of the server.|
|unimrcp-client||Shared libraries and sample applications of the client. [Optional]|
|unimrcp-demo-plugins||Set of demo plugins to the server. [Optional]|
|unimrcp-common||Data common for the client and the server.|
|uniapr||UniMRCP edition of the Apache Portable Runtime (APR) library.|
|uniapr-util||UniMRCP edition of the Apache Portable Runtime Utility (APR-Util) library.|
|unisofia-sip||UniMRCP edition of the Sofia SIP library.|
Note that all the RPM packages provided by UniMRCP are signed by a GNU Privacy Guard (GPG) key. Before starting the installation, you may need to import the public key in order to allow the rpm utility to verify the packages.
rpm --import https://unimrcp.org/keys/unimrcp-gpg-key.public
Packages for the APR, APR-Util and Sofia-SIP libraries must be installed first.
rpm -ivh uniapr-$aprversion-$packageversion.el$rhelversion.$arch.rpm rpm -ivh uniapr-util-$apuversion-$packageversion.el$rhelversion.$arch.rpm rpm -ivh unisofia-sip-$sofiaversion-$packageversion.el$rhelversion.$arch.rpm
Then, a package containing common data for the client and the server, and a package for the server should follow.
rpm -ivh unimrcp-common-$universion-$packageversion.el$rhelversion.$arch.rpm rpm -ivh unimrcp-server-$universion-$packageversion.el$rhelversion.$arch.rpm
Next, a package containing the utility tool unilicnodegen, required for license deployment.
rpm -ivh unilicnodegen-$toolversion-$packageversion.el$rhelversion.$arch.rpm
Next, a package containing the libevent library.
rpm -ivh unilibevent-$libeventversion-$packageversion.el$rhelversion.$arch.rpm
Finally, a package containing the Voci SR plugin should follow.
rpm -ivh unimrcp-voci-sr-$universion-$packageversion.el$rhelversion.noarch.rpm
The Voci SR plugin to the UniMRCP server is a licensed software.
In order to obtain a trial license, node information must be retrieved and submitted for license generation.
Use the installed tool unilicnodegen to retrieve the node information.
As a result, a text file uninode.info will be saved in the current directory.
Consider the following procedure to place an order.
- Navigate to https://unispeech.io/vocisr.
- Under the section Obtain License, select
- License Variation: Trial
- License Term: 30-day
- License Type: Node-bound
- License Quantity: 2
Ther orders are normally processed within one business day. A license file will be provided as a result.
The license file needs to be placed into the directory /opt/unimrcp/data.
cp umsvoci_*.lic /opt/unimrcp/data
In order to load the Voci SR plugin into the UniMRCP server, open the file unimrcpserver.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the XML element <plugin-factory>. Disable other recognition plugins, if available. The demo plugins for other resources can also be disabled.
<!-- Factory of plugins (MRCP engines) --> <plugin-factory> <engine id="Demo-Recog-1" name="demorecog" enable="false"/> <engine id="Voci-SR-1" name="umsvoci" enable="true"/> </plugin-factory>
In order to enable log output from the plugin and set filtering rules, open the configuration file logger.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the element <sources>.
<source name="VOCI-PLUGIN" priority="INFO" masking="NONE"/>
Open the configuration file umsvoci.xml, located in the directory /opt/unimrcp/conf, and specify a Voci service endpoint.
<service-endpoints load-balancing="round-robin" fail-over="true"> <service-endpoint enable="true" service-uri="ws://127.0.0.1:17171/transcribe"/> </service-endpoints>
Validate your setup by using the sample UniMRCP client and server applications on the same host. The default configuration and data files should be sufficient for a basic test.
Launch the UniMRCP server application.
cd /opt/unimrcp/bin ./unimrcpserver
In the server log output, check whether the plugin is normally loaded.
[INFO] Load Plugin [Voci-SR-1] [/opt/unimrcp/plugin/umvoci.so]
Next, check for the license information.
[NOTICE] UniMRCP Voci License -product name: umsvoci -product version: 1.0.0 -license owner: - -license type: trial -issue date: 2021-10-20 -exp date: 2021-11-19 -channel count: 2 -feature set: 0
The optional package umc-addons must be installed for this test to work.
Launch the sample UniMRCP client application umc.
cd /opt/unimrcp/bin ./umc
Run a typical speech recognition scenario by issuing the command run tsr1 from the console of the umc client application.
This command sends a RECOGNIZE request to the server and then starts streaming a sample audio input file bookroom.pcm to recognize.
Check for the NLSML results to be returned as expected.
<?xml version="1.0"?> <result> <interpretation grammar="builtin:speech/transcribe" confidence="1"> <instance>book a room</instance> <input mode="speech">book a room</input> </interpretation> </result>
Visually inspect the log output for any possible warnings or errors.
Note that utterances are stored in the var directory, if the corresponding parameter is enabled in the configuration file umsvoci.xml and/or requested by the client.